The Q5 is Audi's best-selling SUV in the UK by a wide margin, which creates an interesting problem if you're trying to make yours stand out: there are a lot of them about, and S Line trim is common enough on used examples that a stock-looking Q5 barely registers on the road. That's actually good news for styling, because it means a Q5 responds well to even modest changes — you don't need to go far to look different from the next one in the car park.
We stock parts for both the original 8R and the current FY generation, focused on the two upgrades Q5 and SQ5 owners ask about most: front splitters and roof spoilers.
Front Splitters
Splitter fitment on the FY Q5 comes down to one thing above all else: which bumper you have. We stock a 3-piece front splitter for the S Line/SQ5 pre-facelift bumper (2018-2020) and a separate splitter for the facelift bumper (2020+), both in gloss black ABS — and the two are not interchangeable, because Audi reshaped the lower bumper opening between the two versions. As with any 3-piece splitter, matching your exact bumper to the fitment photos first is the step that actually matters here; the splitter itself is a solid, well-finished part, but it can only sit flush if it's matched to the right bumper shape.
Rear Spoilers
Roof spoilers are the more universally popular upgrade on the Q5, largely because they suit both S Line and standard trims without looking out of place on either. The 8R (2009-2017) gets a gloss black roof spoiler that also fits the S Line version of that generation, and the FY (2017+) gets an equivalent gloss black roof spoiler for the Q5 and SQ5. Unlike a splitter, a roof spoiler is a genuinely low-risk first upgrade — it's a subtle, factory-plausible change that's hard to get wrong.
Splitter and Spoiler Together: Does It Look Like Too Much?
This is a question we get a lot from Q5 owners who haven't modified a car before, and the honest answer is no — on an SUV shape like the Q5, a front splitter and roof spoiler together read as a coherent, finished look rather than an overdone one. The splitter does its work low down at the front, the spoiler does its work high up at the back, and because they're both gloss black ABS, they read as a matched pair rather than two separate additions. If you're easing into styling your car for the first time, this is one of the safer combinations to start with.
Fitting Notes
The roof spoiler is the more straightforward of the two, generally locating onto the tailgate's existing profile and secured with automotive-grade double-sided tape onto a properly cleaned surface — most owners manage this one themselves. The splitter is a bigger job: the front bumper typically needs to come forward enough for clean, dry access underneath, and getting the tape to bond properly means the surface needs to be spotless and ideally warmed before fitting, particularly in cooler UK conditions. If you're not confident doing that yourself, a bodyshop fit is worth the cost to avoid a part that lifts at the edges.
8R vs FY: What Changes
The 8R (2008-2017) was the original Q5, a slightly more upright and conservative shape than what followed. The FY (2017+) is the current, larger generation, and within it there's a further pre-facelift vs facelift (2020+) bumper split that affects splitter fitment specifically — this is the detail that trips people up most often, because the car still looks like an FY Q5 either way, but the bumper opening underneath changed. Roof spoilers are less sensitive to the facelift split than splitters, since they mount higher up on a part of the car that changed less. Always confirm your build year against the product fitment notes before ordering, especially if you're anywhere near the 2020 facelift cutoff.
Frequently Asked Questions
How do I tell if my FY Q5 is pre-facelift or facelift?
The clearest giveaway is the bumper and headlight shape — facelift cars (2020+) have a revised front bumper and grille surround compared to the earlier 2017-2020 cars. Checking your registration date against the 2020 cutoff is the quickest way to narrow it down before ordering.
Does the splitter fit a standard, non-S Line Q5?
No — it's built around the S Line/SQ5 bumper's lower opening, so it won't sit flush on a standard SE bumper.
Will the roof spoiler fit both the Q5 and SQ5?
Yes, on both the 8R and FY generations — the tailgate profile is shared across trims within each generation, so the roof spoiler isn't trim-specific the way the splitter is.
Is fitting a splitter likely to affect an MOT?
A correctly fitted, securely mounted splitter with no sharp or loose edges shouldn't cause an issue, but any exterior modification should be fitted properly and checked for security — a loose or poorly bonded part is the kind of thing that could be flagged.
Shop Audi Q5 Parts
Browse the full Audi Q5 and SQ5 range in our Audi Q5 collection.